In the Windows Vista and later operating systems of Windows, the BCD (Boot Configuration Data) store contains the boot entries, which are read by the boot manager when the system is started. The well being of the BCD store is very essential for the system. However, due to some unavoidable circumstances such as virus infections, power outages, hardware malfunctioning, abrupt or unplanned system shutdown, etc the BCD store gets corrupt and you are unable to start the system. In such cases, you should try to rebuild the BCD store to recover Windows data using appropriate methods. If these methods are insufficient to save your day, then I would suggest using a third-party Windows data recovery software from the inaccessible system.
Consider a situation in which you are unable to start your Windows Vista-based system. An error message is displayed in this regard, that is:
“File: \Boot\BCD
Status: 0xc0000034
Info: The Windows Boot Configuration Data file is missing required information”
Cause:
Such problems at system startup can appear for either of the following conditions is true:
* The Boot\BCD file on the active partition is damaged or missing.
* The Windows Boot Manager (Bootmgr) entry is not present is the BCD store.
Resolution:
This problem can be resolved using either of the following methods. Please note that you follow these methods in the given sequence only:
* Repair the BCD store by using the Startup Repair option: You should use the 'Startup Repair' option in the Windows Recovery Environment to repair the BCD store. Restart the system after doing this. If the problem is not solved, then proceed to the next method.
* Rebuild the BCD store by using the Bootrec.exe tool: You should rebuild the BCD store by using the Bootrec.exe tool in the Windows Recovery Environment. Restart the system after doing this. If the problem persists, then try the next method.
* Rebuild the BCD store manually by using the Bcdedit.exe tool: Finally, you should try out manually rebuilding the BCD store by using the Bcdedit.exe tool.
If the problem is still persisting, then you should recover Windows data using a powerful third-party data recovery software. These hard drive recovery utilities are able to recover all the inaccessible files using fast and sophisticated scanning algorithms without any data loss.
Consider a situation in which you are unable to start your Windows Vista-based system. An error message is displayed in this regard, that is:
“File: \Boot\BCD
Status: 0xc0000034
Info: The Windows Boot Configuration Data file is missing required information”
Cause:
Such problems at system startup can appear for either of the following conditions is true:
* The Boot\BCD file on the active partition is damaged or missing.
* The Windows Boot Manager (Bootmgr) entry is not present is the BCD store.
Resolution:
This problem can be resolved using either of the following methods. Please note that you follow these methods in the given sequence only:
* Repair the BCD store by using the Startup Repair option: You should use the 'Startup Repair' option in the Windows Recovery Environment to repair the BCD store. Restart the system after doing this. If the problem is not solved, then proceed to the next method.
* Rebuild the BCD store by using the Bootrec.exe tool: You should rebuild the BCD store by using the Bootrec.exe tool in the Windows Recovery Environment. Restart the system after doing this. If the problem persists, then try the next method.
* Rebuild the BCD store manually by using the Bcdedit.exe tool: Finally, you should try out manually rebuilding the BCD store by using the Bcdedit.exe tool.
If the problem is still persisting, then you should recover Windows data using a powerful third-party data recovery software. These hard drive recovery utilities are able to recover all the inaccessible files using fast and sophisticated scanning algorithms without any data loss.
0 comments:
Post a Comment